Scope

This standard specifies the terms and definitions, requirements, test methods, sampling, inspection rules, packaging and marking of ultrafine fiber blankets. This standard is applicable to polyester microfiber blankets with single or double layer stitching by warp knitting. Other ultrafine fiber blankets can refer to the implementation The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document

GB/T 29 10 (All Parts) Quantitative Chemical Analysis of Textiles

GB/T 3920 Textiles - Tests for Color Fastness to Rubbing

GB/T 3921-2008 Textiles - Tests for Color Fastness to Soap

GB/T 3922 Textiles - Test Method for Color Fastness to Sweating

GB/T 3923.1 Textiles - Tensile Properties of Fabrics: Part 1; Determination of Breaking Strength and Elongation at Break GB 5296.4 Instructions for Use of Consumer Goods - Instructions for Use of Textiles and Clothing

GB/T 5711 Textiles - Tests for Color Fastness to Dry Cleaning - GB/T 5713 Textiles - Tests for Color Fastness to Water - GB/T6529 Textiles - Standard Atmosphere for Humidification and Testing - GB/P>

GB/T8170 Rules for Rounding off Values and Representation and Determination of Limit Values

GB/T 8427-2008 Textiles - Color Fastness Tests - Human Resistance Color fastness to light: Cylinder arc

GB/T 8628 Textiles - Preparation of samples and clothing for measuring changes in fabric size Labeling and Measurement GB/T8629-2001 Household Washing and Drying Procedures for Textile Testing

GB/T 8630 Textiles - Determination of Dimensional Change after Washing and Drying

GB/T 10685-2007 Test Method for Wool Fiber Diameter - Projection Microscope Method GB 18401 National Basic Safety Technical Specification for Textile Products

GB/T 24121 Test Method for Broken Needle Residues in Textile Products - FZ/T 01053 Identification of Textile Fiber Content

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China