1 Scope

This document specifies the technical requirements, testing methods, inspection rules, acceptance rules, packaging, and labeling of low wool blended and wool-like knitwear.

This document is applicable to identifying the quality of low wool blended knitwear with a cotton wool content of less than 30%, pure or blended non-cotton wool fiber wool-like knitwear, and products made by splicing the above knitted fabric with other fabrics. Other animal hair fiber products can also be referred to for implementation This document is not applicable to low wool blended and wool-like knitted products for young children aged 36 months and below

2 Normative References

The content in the following documents constitutes an essential clause of this document through normative references in the text.

. Among them, for dated references, only the version corresponding to that date is applicable to this document; For undated references, the latest version (including all modification orders) applies to this document GB/T 2910 (all parts) Quantitative Chemical Analysis of Textiles

GB/T 3920 Textiles - Tests for Color Fastness to Rubbing

GB/T 3922 Textiles - Tests for Color Fastness to Sweating

GB/T 4802.3 Textiles - Determination of Pilling and Pilling Properties of Fabrics - Part 3: Pilling Box Method

GB/T 4841.3 Dye Dye Standard Depth Color Card 2/1.1/3.1/6.1/12.1/25

GB/T 4856 Needle Cotton Crystal Packaging

GB/T 5711 Textiles - Tests for Color Fastness to Dry Cleaning with Tetrachloroethylene

GB/T 5713 Textiles - Tests for Color Fastness to Water

GB/T 8427-2019 Textiles - Tests for Color Fastness to Artificial Light: Xenon Arc

GB/T 9994 Textiles - Determination of Moisture Content and Moisture regain - Oven drying method

GB/T 12490-2014 Textiles - Color Fastness Test - Resistance to Household and Commercial Use

GB/T 16988 Determination of Content of Special Animal Fibers and Sheep Wool Mixtures for Industrial Washing

GB/T 18401 National Technical Specification for Basic Safety of Textile Products

GB/T 19981.2 Professional Maintenance of Textile Fabrics and Clothing - Dry and Wet Cleaning - Part 2: Procedure for Performance Testing when Using Tetrachloroethylene for Dry Cleaning and Ironing

GB/T 23322 Determination of Textile Surfactants - Alkylphenol and Alkylphenol Polyoxyethylene Ether

GB/T 29862 Spinning Identification of fiber content in fabrics

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China