This standard specifies the requirements, testing, inspection rules, marking, packaging, transportation, and storage for cotton based bamboo pulp viscose fibers and ramie fibers with a total content of 55% or more (ramie fiber content of 15% or more) and cotton blended natural colored fabrics (hereinafter referred to as bamboo hemp cotton blended natural colored fabrics). This standard is applicable to the quality evaluation of bamboo hemp cotton blended natural color fabrics. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 2910.6 Quantitative Chemical Analysis of Textiles - Part 6: Viscose Fibers, Certain Copper Ammonia Fibers, Modal Fibers, or Mixtures of Carrageenan and Cotton (Formic Acid/Zinc Chloride Method) - GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Strength and Elongation at Break (Strip Method) - GB/T 4666 Textiles - Determination of Length and Width of Fabrics - GB/T 4668- Determination of Fabric Density - GB/T 5296.4- Consumer Instructions - Part 4; Textiles and Clothing GB/T 8170 Rules for Rounding off Values and Determination of Limit Values FZ/T01053 Identification of Fiber Content in Textiles FZ/T 10004-2008 Inspection Rules for Cotton and Chemical Fiber Pure Spinning and Blended Natural Color Cloth FZ/T 10009 Cotton and Chemical Fiber Pure Spinning and Blended Natural Color Cloth Marking and Packaging FZ/T 30003-2009 Quantitative Analysis Method for Hemp Cotton Blended Products Microscopic Projection Method

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China