This standard specifies the terms and definitions, requirements, test methods, inspection rules, packaging, marking, transportation, etc. of ramie colored woven fabrics (including products interwoven or blended with ramie and other fibers). This standard is applicable to the evaluation of the quality of woven ramie colored fabrics. 2 Normative References: The clauses in the following documents become clauses of this standard through reference in this standard. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB/T 250 Textiles - Evaluation of Color Fastness - Grey Sample Card for Discoloration - GB/T 251 Textiles - Evaluation of Color Fastness - Grey Sample Card for Staining - GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Plan for Batch Inspection Retrieved by Acceptance Quality Limit (AQL) - GB/T 2910 (All Parts) Quantitative Chemical Analysis of Textiles GB/T 3917.1 Textiles - Tearing Properties of Fabrics - Part 1: Determination of Tearing Strength, Impact Pendulum Method - GB/T 3920 Textiles - Color Fastness to Rubbing - GB/T 3921 Textiles - Color Fastness to Soap - GB/T 3922 Textiles - Test Method for Color Fastness to Sweat - GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Strength and Elongation at Break - Strip Method - GB/T 4666 Textiles - Fabric Length GB/T 4668 Determination of Density and Width of Woven Fabrics GB/T 5296.4 Instructions for the Use of Consumer Goods GB/T 5713 Instructions for the Use of Textiles and Clothing GB/T 5713 Textiles - Tests for Color Fastness to Water GB/T 6152 Textiles - Tests for Color Fastness to Heat Compression GB/T 8170 Rules for Rounding off Values and Representation and Determination of Limit Values GB/T 8628 Textiles - Preparation of Fabric Samples and Clothing for Testing Dimensional Changes, GB/T 8628, Labeling and Measurement GB/T 8629 Household Washing and Drying Procedures for Textile Testing GB/T 8630 Determination of Dimensional Change after Washing and Drying GB/T 14801 Test Methods for Weft Inclination and Bow Weft of Woven and Knitted Fabrics GB/T 18401 National Basic Safety Technical Specification for Textile Products FZ/T 01053 Identification of Fiber Content in Textiles FZ/T30003 Quantitative Analysis Method for Hemp Cotton Blended Products Microscopic Projection Method

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China