This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage of ramie cotton blended natural color fabric. This standard is applicable to the identification of the quality of natural colored fabrics made of ramie cotton blends (with a ramie content of 50% or more). 2 Normative References: The clauses in the following documents become clauses of this standard through reference in this standard. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Strength and Elongation at Break - Strip Method - GB/T 4666 Determination of Length of Woven Fabrics - GB/T4667 Determination of Width of Woven Fabrics - GB/T4668 Determination of Density of Woven Fabrics - GB/T8170 Rules for Rounding off Values - FZ/T01053 Identification of Fiber Content in Textiles - FZ/T 30003 Quantitative Analysis Method for Ramie Cotton Blended Products - Microscopic Projection Method - Classification of Ramie Cotton Blended Natural Color Fabrics by Variety and Specification, Developed by the production department according to user needs. The technical requirements for ramie cotton blended natural color fabric include six items: fabric organization, width deviation rate, density deviation rate, fiber content deviation rate, breaking strength deviation rate, and fabric surface defects. 4.1 Grading Regulations 4.1.1 The quality of ramie cotton blended natural color fabric is pided into first-class, first-class, and second-class products, with products below second-class being substandard. 4.1.2 The rating of ramie cotton blended natural color fabric is measured in pieces. The fabric organization, width deviation rate, fabric surface defects are evaluated according to the grade, density deviation rate, fiber content deviation rate, and breaking strength deviation rate are evaluated according to the criticism, and the lowest of the six items is selected as the grade of the fabric

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China